Support arms manoeuvre smoothly as they absorb the torque reactions from the screwdrivers providing ergonomic support for the operator. They reduce RMI (Repetitive Motion Injury) and CTS (Carpal Tunnel Syndrome) while boosting production.
Folding and Linear Torque Reaction Arm Series
Torque folding arms have been designed to eliminate the reaction generated by screwdrivers when they stop at the pre-set torque. Options include table or wall mount.
LINAR linear arms keep the tool perpendicular and prevent cross threading and side load. Each model extends in horizontal direction and arm length is adjustable. The fluid movement increases precision and production for a variety of torque applications.
Telescopic Carbon Arm Series
CAR series torque reaction arms eliminate the reaction that screwdrivers generate when they stop at the pre-set torque (up to 50 Nm).
Their carbon structure makes them extremely lightweight and incredibly resistant at the same time. This means that they resist degradation in high fatigue applications much better than conventional materials.
Suspended Torque Arm Series
SAR Suspended Torque Arms are the ideal solution to increase productivity. They can be easily installed on most workplaces to help the operator handle the screwdriver in total safety and stability while keeping the workspace clear. With minimized reaction force you will also improve finished product quality because there is no movement of the tool and all torque is absorbed in the joint.
SAR arms are supplied without tool holder – to be purchased depending on the screwdriver used (see chart on the next page).
100% made in Italy by Kolver
Folding and Linear Torque Reaction Arms
| Model | Code | Arm Weight kg | Max Payload kg | Min Reach mm | Max Reach mm | Max Torque Nm |
|---|
PA2KOL
3D | 010600 | 2.5 | 1.5 | 440 | 640 | 20 |
PA7KOL
3D | 010602 | 4.2 | 10* | 500 | 950 | 75 |
PS7KOL
3D | 010603 | 5.3 | 10* | 300 | 1000 | 75 |
LINAR1
2D2D expl3D | 010681 | 1.5 | 1.5 | 184 | 665 | 25 |
LINAR2
2D2D expl3D | 010682 | 1.5 | 1.5 | 184 | 665 | 50 |
LINART
2D3D | 010683 | 1.6 | 1.4 | 114 | 740 | 25 |
* Required payload is to be specified with order
Folding and Linear Torque Reaction Arms with Autoadvance Kit
| Model | Code | Arm Weight kg | Piston Stroke mm | Min Reach mm | Max Reach mm | Max Torque Nm |
|---|
| LINAR2/A | 010682/A | 6.1 | 0 - 50 | 184 | 665 | 50 |
The Autoadvance kit can be supplied separately – to be installed on LINAR2 and LINART to convert them into /A models (code: 020099)
Telescopic Torque Reaction Arms
Suspended Torque Arms
| Model | Code | Arm Weight kg | Max Payload kg | Vertical Z Stroke mm | Horizontal X Stroke mm | Lateral Y Stroke mm | Max Torque Nm |
|---|
SAR15 Z
2D2D expl | 010690/Z/5 | 1.2 | 1.8 | 364 | - | - | 15 |
SAR15 XZ 85
2D2D expl3D | 010690/XZ/85 | 1.2 | 1.8 | 364 | 692 | - | 15 |
SAR15 XYZ 855
2D2D expl3D | 010690/XYZ/855 | 1.7 | 1.3 | 885 | 692 | 376 | 15 |
Tool holders for SAR arms:
Tool holder for PLUTO and RAF series inline screwdrivers (code: 010695)
Tool holder for FAB, NATO & MITO series inline screwdrivers (code: 010698)
Tool holder for right angle PLUTO screwdrivers (up to 15 Nm) (code: 010695/P)
Tool holder for K-DUCER series screwdrivers (code: 010701)
Reinforced tool holder for K-DUCER series screwdrivers (code: 010703)
Universal Tool Holder for any screwdriver (max diametre 47 mm) (code: 010695/UNI)
Folding and Linear Positioning Arms
| Model | Code | Max Torque Nm | Min Reach mm | Max Reach mm | Min distance between screws at max extension |
|---|
LINAR1/TLS1
2D2D expl3D | 010681/TLS1 | 25 | 184 | 665 | 6 mm |
LINAR2/TLS1
2D2D expl3D | 010682/TLS1 | 50 | 184 | 665 | 6 mm |
LINART/TLS1
2D2D expl3D | 010683/TLS1 | 25 | 114 | 740 | 7 mm |
Either of the following cables must be specified at time of purchase:
Cable to connect TLS system to EDU1FR/SG controller (code: 260003/1)
Cable to connect TLS system to EDU1BL/SG, EDU2AE, EDU2AE/HPro, EDU2AE/TOP or EDU2AE/TOP/TA controller (code: 260004/1)
Cable to connect TLS system to KDU controller (code: 260004/KDU)
Folding and Linear Positioning Arms with Autoadvance Kit
| Model | Code | Max Torque Nm | Piston Stroke mm | Min Reach mm | Max Reach mm | Min distance between screws (max extension) |
|---|
LINAR2/TLS1/A
2D3D | 010682/TLS1/A | 50 | 0 - 50 | 184 | 665 | 6 |
Either of the following cables must be specified at time of purchase:
Cable to connect TLS system to EDU1FR/SG controller (code: 260003/1)
Cable to connect TLS system to EDU1BL/SG, EDU2AE, EDU2AE/HPro, EDU2AE/TOP or EDU2AE/TOP/TA controller (code: 260004/1)
Cable to connect TLS system to KDU controller (code: 260004/KDU)
--------
The Autoadvance kit can be supplied separately – to be installed on LINAR2/TLS1 and LINART/TLS1 to convert them into /A models (code: 020099)
Telescopic
| Model | Code | Max Torque Nm | Min Reach mm | Max Reach mm | Min distance between screws at max extension |
|---|
CAR281/TLS1
2D2D expl3D | 010663/TLS1 | 25 | 490 | 950 | 9 mm |
CAR282/TLS1
2D3D | 010664/TLS1 | 25 | 730 | 1650 | 15 mm |
CAR501/TLS1
2D3D | 010665/TLS1 | 50 | 490 | 950 | 9 mm |
CAR502/TLS1
2D3D | 010666/TLS1 | 50 | 730 | 1650 | 15 mm |
Either of the following cables must be specified at time of purchase:
Cable to connect TLS system to EDU1FR/SG controller (code: 260003/1)
Cable to connect TLS system to EDU1BL/SG, EDU2AE, EDU2AE/HPro, EDU2AE/TOP or EDU2AE/TOP/TA controller (code: 260004/1)
Cable to connect TLS system to KDU controller (code: 260004/KDU)
Positioning Arms
| Model | Code | Max Torque Nm | Arm Weight kg | Vertical Stroke Z mm | Vertical Stroke X mm | Vertical Stroke Y mm |
|---|
| SAR15 XYZ/TLS1 | 010690/XYZ/TLS1 | 15 | 8 | 885 | 692 | 376 |
Tool holders for SAR arm:
Tool holder for PLUTO and RAF series inline screwdrivers (code: 010695)
Tool holder for FAB, NATO & MITO series inline screwdrivers (code: 010698)
Tool holder for right angle PLUTO screwdrivers (up to 15 Nm) (code: 010695/P)
Universal Tool Holder for any screwdriver (max diametre 47 mm) (code: 010695/UNI)
--------
Either of the following cables must be specified at time of purchase:
Cable to connect TLS system to EDU1FR/SG controller (code: 260003/1)
Cable to connect TLS system to EDU1BL/SG, EDU2AE, EDU2AE/HPro, EDU2AE/TOP or EDU2AE/TOP/TA controller (code: 260004/1)
Cable to connect TLS system to KDU controller (code: 260004/KDU)
Folding and Linear Torque Reaction Arms
Model: PA2KOL
2D 2D expl Misc 3D |
|---|
| Code: 010600 |
| Arm Weight kg: 2.5 |
| Max Payload kg: 1.5 |
| Min Reach mm: 440 |
| Max Reach mm: 640 |
| Max Torque Nm: 20 |
Model: PA7KOL
2D 2D expl Misc 3D |
|---|
| Code: 010602 |
| Arm Weight kg: 4.2 |
| Max Payload kg: 10* |
| Min Reach mm: 500 |
| Max Reach mm: 950 |
| Max Torque Nm: 75 |
Model: PS7KOL
2D 2D expl Misc 3D |
|---|
| Code: 010603 |
| Arm Weight kg: 5.3 |
| Max Payload kg: 10* |
| Min Reach mm: 300 |
| Max Reach mm: 1000 |
| Max Torque Nm: 75 |
Model: LINAR1
2D 2D expl Misc 3D |
|---|
| Code: 010681 |
| Arm Weight kg: 1.5 |
| Max Payload kg: 1.5 |
| Min Reach mm: 184 |
| Max Reach mm: 665 |
| Max Torque Nm: 25 |
Model: LINAR2
2D 2D expl Misc 3D |
|---|
| Code: 010682 |
| Arm Weight kg: 1.5 |
| Max Payload kg: 1.5 |
| Min Reach mm: 184 |
| Max Reach mm: 665 |
| Max Torque Nm: 50 |
Model: LINART
2D 2D expl Misc 3D |
|---|
| Code: 010683 |
| Arm Weight kg: 1.6 |
| Max Payload kg: 1.4 |
| Min Reach mm: 114 |
| Max Reach mm: 740 |
| Max Torque Nm: 25 |
* Required payload is to be specified with order
Folding and Linear Torque Reaction Arms with Autoadvance Kit
| Model: LINAR2/A |
|---|
| Code: 010682/A |
| Arm Weight kg: 6.1 |
| Piston Stroke mm: 0 - 50 |
| Min Reach mm: 184 |
| Max Reach mm: 665 |
| Max Torque Nm: 50 |
The Autoadvance kit can be supplied separately – to be installed on LINAR2 and LINART to convert them into /A models (code: 020099)
Telescopic Torque Reaction Arms
Model: CAR101
2D 2D expl Misc 3D |
|---|
| Code: 010661 |
| Arm Weight kg: 0.20 |
| Max Payload kg: 2.7 |
| Min Reach mm: 549 |
| Max Reach mm: 906 |
| Max Torque Nm: 10 |
Model: CAR281
2D 2D expl Misc 3D |
|---|
| Code: 010663 |
| Arm Weight kg: 0.60 |
| Max Payload kg: 2.7 |
| Min Reach mm: 490 |
| Max Reach mm: 950 |
| Max Torque Nm: 25 |
Model: CAR282
2D 2D expl Misc 3D |
|---|
| Code: 010664 |
| Arm Weight kg: 0.75 |
| Max Payload kg: 2.7 |
| Min Reach mm: 730 |
| Max Reach mm: 1650 |
| Max Torque Nm: 25 |
Model: CAR501
2D 2D expl Misc 3D |
|---|
| Code: 010665 |
| Arm Weight kg: 0.65 |
| Max Payload kg: 2.7 |
| Min Reach mm: 490 |
| Max Reach mm: 950 |
| Max Torque Nm: 50 |
Model: CAR502
2D 2D expl Misc 3D |
|---|
| Code: 010666 |
| Arm Weight kg: 0.80 |
| Max Payload kg: 2.7 |
| Min Reach mm: 730 |
| Max Reach mm: 1650 |
| Max Torque Nm: 50 |
Suspended Torque Arms
Model: SAR15 Z
2D 2D expl |
|---|
| Code: 010690/Z/5 |
| Arm Weight kg: 1.2 |
| Max Payload kg: 1.8 |
| Vertical Z Stroke mm: 364 |
| Horizontal X Stroke mm: - |
| Lateral Y Stroke mm: - |
| Max Torque Nm: 15 |
Model: SAR15 XZ 85
2D 2D expl Misc 3D |
|---|
| Code: 010690/XZ/85 |
| Arm Weight kg: 1.2 |
| Max Payload kg: 1.8 |
| Vertical Z Stroke mm: 364 |
| Horizontal X Stroke mm: 692 |
| Lateral Y Stroke mm: - |
| Max Torque Nm: 15 |
Model: SAR15 XYZ 855
2D 2D expl Misc 3D |
|---|
| Code: 010690/XYZ/855 |
| Arm Weight kg: 1.7 |
| Max Payload kg: 1.3 |
| Vertical Z Stroke mm: 885 |
| Horizontal X Stroke mm: 692 |
| Lateral Y Stroke mm: 376 |
| Max Torque Nm: 15 |
Tool holders for SAR arms:
Tool holder for PLUTO and RAF series inline screwdrivers (code: 010695)
Tool holder for FAB, NATO & MITO series inline screwdrivers (code: 010698)
Tool holder for right angle PLUTO screwdrivers (up to 15 Nm) (code: 010695/P)
Tool holder for K-DUCER series screwdrivers (code: 010701)
Reinforced tool holder for K-DUCER series screwdrivers (code: 010703)
Universal Tool Holder for any screwdriver (max diametre 47 mm) (code: 010695/UNI)
Folding and Linear Positioning Arms
Model: LINAR1/TLS1
2D 2D expl Misc 3D |
|---|
| Code: 010681/TLS1 |
| Max Torque Nm: 25 |
| Min Reach mm: 184 |
| Max Reach mm: 665 |
| Min distance between screws at max extension: 6 mm |
Model: LINAR2/TLS1
2D 2D expl Misc 3D |
|---|
| Code: 010682/TLS1 |
| Max Torque Nm: 50 |
| Min Reach mm: 184 |
| Max Reach mm: 665 |
| Min distance between screws at max extension: 6 mm |
Model: LINART/TLS1
2D 2D expl Misc 3D |
|---|
| Code: 010683/TLS1 |
| Max Torque Nm: 25 |
| Min Reach mm: 114 |
| Max Reach mm: 740 |
| Min distance between screws at max extension: 7 mm |
Either of the following cables must be specified at time of purchase:
Cable to connect TLS system to EDU1FR/SG controller (code: 260003/1)
Cable to connect TLS system to EDU1BL/SG, EDU2AE, EDU2AE/HPro, EDU2AE/TOP or EDU2AE/TOP/TA controller (code: 260004/1)
Cable to connect TLS system to KDU controller (code: 260004/KDU)
Folding and Linear Positioning Arms with Autoadvance Kit
Model: LINAR2/TLS1/A
2D 2D expl Misc 3D |
|---|
| Code: 010682/TLS1/A |
| Max Torque Nm: 50 |
| Piston Stroke mm: 0 - 50 |
| Min Reach mm: 184 |
| Max Reach mm: 665 |
| Min distance between screws (max extension): 6 |
Either of the following cables must be specified at time of purchase:
Cable to connect TLS system to EDU1FR/SG controller (code: 260003/1)
Cable to connect TLS system to EDU1BL/SG, EDU2AE, EDU2AE/HPro, EDU2AE/TOP or EDU2AE/TOP/TA controller (code: 260004/1)
Cable to connect TLS system to KDU controller (code: 260004/KDU)
--------
The Autoadvance kit can be supplied separately – to be installed on LINAR2/TLS1 and LINART/TLS1 to convert them into /A models (code: 020099)
Telescopic
Model: CAR281/TLS1
2D 2D expl Misc 3D |
|---|
| Code: 010663/TLS1 |
| Max Torque Nm: 25 |
| Min Reach mm: 490 |
| Max Reach mm: 950 |
| Min distance between screws at max extension: 9 mm |
Model: CAR282/TLS1
2D 2D expl Misc 3D |
|---|
| Code: 010664/TLS1 |
| Max Torque Nm: 25 |
| Min Reach mm: 730 |
| Max Reach mm: 1650 |
| Min distance between screws at max extension: 15 mm |
Model: CAR501/TLS1
2D 2D expl Misc 3D |
|---|
| Code: 010665/TLS1 |
| Max Torque Nm: 50 |
| Min Reach mm: 490 |
| Max Reach mm: 950 |
| Min distance between screws at max extension: 9 mm |
Model: CAR502/TLS1
2D 2D expl Misc 3D |
|---|
| Code: 010666/TLS1 |
| Max Torque Nm: 50 |
| Min Reach mm: 730 |
| Max Reach mm: 1650 |
| Min distance between screws at max extension: 15 mm |
Either of the following cables must be specified at time of purchase:
Cable to connect TLS system to EDU1FR/SG controller (code: 260003/1)
Cable to connect TLS system to EDU1BL/SG, EDU2AE, EDU2AE/HPro, EDU2AE/TOP or EDU2AE/TOP/TA controller (code: 260004/1)
Cable to connect TLS system to KDU controller (code: 260004/KDU)
Positioning Arms
| Model: SAR15 XYZ/TLS1 |
|---|
| Code: 010690/XYZ/TLS1 |
| Max Torque Nm: 15 |
| Arm Weight kg: 8 |
| Vertical Stroke Z mm: 885 |
| Vertical Stroke X mm: 692 |
| Vertical Stroke Y mm: 376 |
Tool holders for SAR arm:
Tool holder for PLUTO and RAF series inline screwdrivers (code: 010695)
Tool holder for FAB, NATO & MITO series inline screwdrivers (code: 010698)
Tool holder for right angle PLUTO screwdrivers (up to 15 Nm) (code: 010695/P)
Universal Tool Holder for any screwdriver (max diametre 47 mm) (code: 010695/UNI)
--------
Either of the following cables must be specified at time of purchase:
Cable to connect TLS system to EDU1FR/SG controller (code: 260003/1)
Cable to connect TLS system to EDU1BL/SG, EDU2AE, EDU2AE/HPro, EDU2AE/TOP or EDU2AE/TOP/TA controller (code: 260004/1)
Cable to connect TLS system to KDU controller (code: 260004/KDU)
